The CS ULTRA PRO
uncompromising and efficient
The superior Scanner Generation
Sophisticated technology, uncompromising efficiency and accomplished design are the characteristics of the “PRO” series. The “CS ULTRA PRO” is a high-performance scanner of the second generation, developed for professional users with a sophisticated requirement profile.
Hand-drawn colour markings on the model are neatly and sharply captured, and prepared in Exocad for the design process. This function is especially helpful for the digital manufacturing of partial frameworks.
New high-performance industrial cameras with an ultra-fast USB 3.0 interface and new CMOS sensor. The high data rate shortens the scan time by around 40%, and the transfer speed to the PC is increased significantly.
The unique drive system and improved sensors ensure more dynamics during the scanning process. An advanced data format with further developed compression reduces the memory requirement by up to 80% in comparison to the previous version.
The “direct positioning system enables direct control of individual scanner axes for the capturing of hard-to-access areas.
The “index positioning system” guarantees the simultaneous capturing of the current model position, which guarantees ultra-fast and accurate digitalisation, even with objects with small parts.
All common indications - from caps and frames, and occlusal splints to individual abutments - can be easily scanned and modelled.
All standard articulators (incl. Amann Girrbach, KaVo, and SAM) can be digitally captured. Anatomically correct bite positions can be transferred into exocad. Chewing simulations can also be performed flawlessly.
Greater convenience through a user-friendly mounting system as well as a practical “wizard function” - taking you through the scanning process with ease from start to finish.
The scanner is already pre-calibrated before assembly and is only supplied to our clients after undergoing successful validation. This ensures that CADstar only supplies the most precise scanning systems possible to its clients.
The calibration body is part of the CS ULTRA re-calibration system and mostly consists of a polished aluminium body. Vibrations and varying environmental conditions can make re-calibration of the system necessary - for this purpose, the calibration body is merely fitted using the fixator base plate in the scanner, and then consequent calibration is carried out fully automatically in less than one minute.
The model holder of the CS ULTRA has a central screw connection in order to keep models constantly at an ideal distance from the camera. The precise processing of the aluminium model holder also minimises vibrations during the axis movements, which contributes to precise scan results.
Diagram including model fixator
With the aid of the optional Split Case Adapter, bite registrations from common articulators can be transferred to the software automatically, correctly and with no loss of precision. The chewing simulation can then be carried out precisely in the virtual articulator while maintaining the axis relation of the physical articulator.
We recommend this accessory above all for users of the following additional packages: Virtual Articulator, Splint Module The Split Cast Adapters are compatible with:
- Artex /Adesso
- KaVo Protar
Optionally available - price on request, for a full functionality you need the Split Cast Scan Modul.
QUARTER TRAY ADAPTER
With the Quarter Tray Adapter, partial models of upper and lower jaws, and up to four stumps, can be scanned simultaneously, which significantly increases the productivity of the scanning system. In just two scanning steps, the occlusion and subsequently the neighbouring teeth and stumps are captured.
Optionally available - price on request, for a full functionality you need the Quarter Tray Scan Modul.
The open construction of the CS ULTRA also enables the user to completely digitalise all common articulators with the aid of the Arti Base. You simply place your articulator in the device - the corresponding scan strategy will then automatically capture the whole vestibular area of the articulated models - there is no annoying fixing of the upper and lower jaw. The determination of the occlusal plane is then carried out in the virtual articulator.
With the Exocad Base Module, a wide range of indications are available:
Additional modules for the CS Ultra
You can find more information about the modules here.
- Dimensions: (W x H x D) 398 x 385 x 387 mm
- Weight: 16 kg
- Scanning process: White stripe light with texture and colour recognition
- 2 scan modes: Wizard and Pro
- 2 USB cameras: USB 3.0 interface, e2y CMOS sensor
- File output formats: STL, OBJ, OFF, PLY
- Scan time: < 5 seconds per recording
- TRUCOLOR function
- Accuracy: up to 5 µm
- Multi die function
- Dental impression scans
- Orthodontic scans
- Simultaneous scanning and modeling
Maxdata Workstation GTX 1050:
- Intel Core-i5 processor
- 8 GB DDR3 RAM
- 500 GB HDD
- Nvidia graphic card with 2 GB
- Windows 10 Professional
- 24" monitor
Advantages at a glance
- Open CAD solution fully accessible on many interfaces
- Quick, efficient, and comfortable integration of all central digital lab work
- Fully automated, error-resistant workflow
- Transparent data management
- Access to all design and production centers worldwide
- Digital platform that is completely compliant with ISO quality standards
- Automatic evolution through continuous updates
- Free CADstar abutment library